| Physical | -- | -- | Physical |
| Specific gravity | ASTM D 792 | 2,22 | Specific gravity |
| Hardness Shore D scale | ASTM D 2240 | 60 to 75 | Hardness Shore D scale |
| Water absoption | ASTM D 570 | 0 | % |
| -- | -- | -- | |
| Mechanical | -- | -- | Mechanical |
| Tensile strenght | ASTM D 1457 | 2000 | psi |
| Elongation | ASTM D 1457 | 175 | % |
| Deformation under load at 2000 psi, 24h at 26ºC | ASTM D 621 | 5 | % |
| Izod impact strenght - notched | ASTM D 256 | 6 | ft-lb/in |
| -- | -- | -- | |
| Thermal | -- | -- | Thermal |
| Thermal conductivity | cenco-finch | 2,3 | BTU in/hr ft^-2 F |
| Flammability (in/min) | ASTM D 635 | non-flammable | Flammability (in/min) |
| Operanting temperature range | -- | -240 to + 287 | ºC |
| Linear coefficient of thermal expansion | ASTM D 696 | -- | *10^-5in/in/ºF |
| -125ºF to +77ºF Molded direction | -- | 6,1 | -125ºF to +77ºF Molded direction |
| -125ºF to +77ºF Cross direction | -- | 4,4 | -125ºF to +77ºF Cross direction |
| -75ºF to +77ºF Molded direction | -- | 7,1 | -75ºF to +77ºF Molded direction |
| -75ºF to +77ºF Cross direction | -- | 4,9 | -75ºF to +77ºF Cross direction |
| -24ºF to +77ºF Molded direction | -- | 8,8 | -24ºF to +77ºF Molded direction |
| -24ºF to +77ºF Cross direction | -- | 5,9 | -24ºF to +77ºF Cross direction |
| 0ºF to +77ºF Molded direction | -- | 10 | 0ºF to +77ºF Molded direction |
| +32ºF to +77ºF Molded direction | -- | 11 | +32ºF to +77ºF Molded direction |
| +32ºF to +77ºF Cross direction | -- | 7,8 | +32ºF to +77ºF Cross direction |
| +48ºF to +77ºF Molded direction | -- | 8,2 | +48ºF to +77ºF Molded direction |
| +48ºF to +77ºF Cross direction | -- | 6,2 | +48ºF to +77ºF Cross direction |
| +77ºF to +150ºF Molded direction | -- | 5,3 | +77ºF to +150ºF Molded direction |
| +77ºF to +150ºF Cross direction | -- | 3,6 | +77ºF to +150ºF Cross direction |
| +77ºF to +250ºF Molded direction | -- | 5,5 | +77ºF to +250ºF Molded direction |
| +77ºF to +250ºF Cross direction | -- | 4,1 | +77ºF to +250ºF Cross direction |
| +77ºF to +350ºF Molded direction | -- | 6,2 | +77ºF to +350ºF Molded direction |
| +77ºF to +350ºF Cross direction | -- | 4,8 | +77ºF to +350ºF Cross direction |
| +77ºF to +450ºF Molded direction | -- | 7,2 | +77ºF to +450ºF Molded direction |
| +77ºF to +450ºF Cross direction | -- | 5,9 | +77ºF to +450ºF Cross direction |
| +77ºF to +550ºF Molded direction | -- | 9,1 | +77ºF to +550ºF Molded direction |
| +77ºF to +550ºF Cross direction | -- | 7,8 | +77ºF to +550ºF Cross direction |
| -- | -- | -- | |
| 0ºF to +77ºF Cross direction | -- | 6,6 | 0ºF to +77ºF Cross direction |
| Recommended operating limits | -- | -- | Recommended operating limits |
| Maximum pressure (P) | -- | 1000 | psi |
| Maximum velocity (V) with no pressure | -- | 400 | Ft/min |
| Maximum PV (P+V) | -- | 10000 | Maximum PV (P+V) |
| Maximum mating surface hardness | -- | -- | Maximum mating surface hardness |
| Rockwell scale | -- | Rc35 | Rockwell scale |
| Brinnell scale | -- | 327 | Brinnell scale |
